AUTO STARTS
 from Alltech Electronics, Inc.

Industrial battery charger auto starts from Alltech Electronics, Inc.

It has been industry known for the past number of years that some type of automated charger control can both save AC power consumption and also increase battery life.  Circuits upon circuits have appeared on the market claiming that their circuit is the ultimate and will turn on everything but the kitchen sink.

 

Alltech industrial battery auto start control

Question:

What do customers do if they don't need all the fancy options that are available and they don't want to spend their money on something they don't need?

Answer:
Alltech Electronics, Inc.
AUTO CHARGE CONTROL

The AUTO CHARGE CONTROL was designed with the following parameters:

  1. An economical circuit that includes only the basic essentials for the operators.
  2. Ease of installation both mechanically and electrically.
  3. Circuitry that is adaptable to most methods of charging without needless field adjustments.

 


Introducing
THE 4200R DIGITAL RETRO-FIT AUTO-START

Alltech 4200R auto start control retrofit

A decade ago, digital auto-starts were an add-on feature. Today, may manufacturers have them as a standard feature. If they fail, replacements can be costly and hard to find due to extended lead times.

QUESTION:

What do you do if your O.E.M. control fails and needs to be replaced?

ANSWER:

Alltech Electronics Inc.
4200R Digital Retro-Fit

 

The 4200R was designed with the following parameters:

  1. An economical circuit with digital and mufti-led indicators.
  2. Ease of installation both mechanically and electrically.
  3. Circuitry that is adaptable to most chargers without needless field adjustments.

The 4200R series Auto-Start
STANDARD FEATURES

  1. START-UP DELAY -- Charger starts in 5 to 6 after battery-charger connection.

  2. PC MOUNTED RELAY -- Capable of handling up to 20 amps at 240 VAC

  3. DUAL COLOR LIGHT -- Red for normal charge, green for weekly charge, toggle switch activated.

  4. 80% CHARGED LIGHT -- Yellow indicates battery is 80% recharged.

  5. SAFETY SHUTDOWN SWITCH -- Toggle switch for emergency shutdown.

  6. CHARGE COMPLETE LIGHT -- Green charged complete at the end of a full charge.

  7. BACKUP TIMER -- Should charger not shut off in twelve hours backup timer overrides.

  8. AC POWER FAILURE MEMORY -- Resumes charge upon return of AC power.

  9. DC CONTROLLED -- No external AC power relays or stepdown PXF needed.

  10. CHARGED BATTERY SHUTDOWN -- If battery reaches 80% charged after first 15 minutes of charging unit shuts down. Eliminates over charging.

  11. EASY MOUNT STEEL BOX -- 4.75" x 6.75" x 2.5" steel box mounts to front of charger via stud-mounts.

  12. BRIGHT DIGITAL READOUT -- Easy to read, bright red digital read-out display.

  13. WRONG VOLTAGE REJECTION -- Unit indicate when wrong cell battery has been connected to charger.

  14. MULTI-VOLTAGE -- One unit will work on all standard DC voltage chargers, easy cell selection via jumper on board.

OPTIONAL FEATURES

  • Factory programmed delay of start -- Allows unit to be pre-programmed for up to 6 hours delay of start.

  • Auto equalize -- will give battery an automatic equalizing charge after (X) number of complete charge cycles.